Do you have an iPad that won’t turn on, even though it’s plugged in and charging You’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there’s usually an easy fix. In this guide, I’ll walk you through the steps to troubleshoot a dead iPad that won’t turn on. I’ll also provide tips on how to prevent this issue from happening in the future.
Reasons Why Dead Ipad Charging But Won’T Turn On
Dead iPad Charging But Won’t Turn On
Cause 1: Software issue
The iPad may be stuck in a boot loop or recovery mode.
To fix this, try force restarting the iPad by pressing and holding the power button and the home button at the same time until you see the Apple logo.
If that doesn’t work, you can try restoring the iPad to factory settings using iTunes.
Cause 2: Hardware issue
The iPad’s battery may be dead or damaged.
To check if the battery is the problem, try connecting the iPad to a power source and see if the battery icon appears.
If the battery icon doesn’t appear, you may need to replace the battery.
Another possibility is that the iPad’s charging port is damaged.
To check if the charging port is the problem, try connecting a different charger to the iPad.
If the iPad still doesn’t charge, you may need to have the charging port repaired or replaced.
Cause 3: Other issues
There may be another issue with the iPad that is preventing it from turning on.
To troubleshoot this, you can try resetting the iPad’s settings, restoring it to factory settings, or taking it to an Apple Store for service.
How to Troubleshoot: Dead iPad Charging But Won’t Turn On
Your iPad is dead and won’t turn on, even though it’s plugged in and charging. This can be a frustrating problem, but there are a few things you can try to troubleshoot the issue.
Possible Causes
There are a few possible causes for this problem, including:
A software problem:
The software on your iPad may have crashed or become corrupted, preventing it from turning on.
A hardware problem:
There may be a problem with the battery, display, or other hardware component on your iPad.
A charging problem:
The charger you’re using may be faulty, or the port on your iPad may be dirty or damaged.
Troubleshooting Steps
To troubleshoot the issue, follow these steps:
1. Try a different charger:
If you’re using a third-party charger, try using the original Apple charger instead. If you’re already using the original Apple charger, try a different one.
2. Clean the charging port:
Use a soft, dry cloth to gently clean the charging port on your iPad. Be careful not to damage the port.3. Force restart your iPad:
Press and hold the power button and the Home button at the same time until you see the Apple logo.
4. Restore your iPad:
If all of the above steps fail, you may need to restore your iPad to factory settings. This will erase all of your data, so be sure to back up your iPad before you do this.
Conclusion
If you’ve tried all of the above steps and your iPad still won’t turn on, you may need to take it to an Apple Store or authorized service provider for further diagnosis and repair.
Must Read THIS: Dead Ipad Won’T Charge
FAQs: Dead iPad Charging But Won’t Turn On
Why is my iPad not turning on even though it’s charging?
There are a few possible reasons why your iPad might not be turning on even though it’s charging. Here are a few of the most common:
The battery is dead: If your iPad’s battery is completely drained, it may not have enough power to turn on. Try plugging your iPad into a power source for at least 30 minutes and then try turning it on again.
The power button is stuck: If the power button on your iPad is stuck, it may not be able to turn on. Try pressing and holding the power button for at least 10 seconds. If your iPad still doesn’t turn on, you may need to have it repaired.
The software is corrupted: If the software on your iPad is corrupted, it may not be able to turn on. Try restarting your iPad by holding down the power button and the home button at the same time for at least 10 seconds. If your iPad still doesn’t turn on, you may need to restore it to factory settings.
What should I do if my iPad is not turning on?
If your iPad is not turning on, here are a few things you can try:
Plug your iPad into a power source for at least 30 minutes: This will give your iPad enough power to turn on.
Press and hold the power button for at least 10 seconds: This will restart your iPad.
Restore your iPad to factory settings: This will erase all of your data, but it may fix the problem if your iPad is not turning on due to a software problem.
Take your iPad to an Apple Store or authorized service provider: They can diagnose the problem and repair your iPad if necessary.
How long does it take for an iPad to charge?
The amount of time it takes for an iPad to charge depends on a few factors, including the following:
The capacity of your iPad’s battery: The larger the battery, the longer it will take to charge.
The power output of the charger: A charger with a higher power output will charge your iPad faster than a charger with a lower power output.
The temperature of your iPad: If your iPad is cold, it will charge slower than if it is warm.
Generally speaking, it takes about 2-3 hours to charge an iPad from 0% to 100%. However, it may take longer if your iPad’s battery is very old or if you are using a charger with a low power output.
What happens if I leave my iPad plugged in overnight?
There is no harm in leaving your iPad plugged in overnight. In fact, it is actually a good idea to do so if you want to make sure that your iPad is fully charged. However, you should avoid leaving your iPad plugged in for extended periods of time if the battery is already fully charged. This can damage the battery over time.
What should I do if my iPad is still not turning on?
If your iPad is still not turning on after trying all of the above steps, you may need to have it repaired. You can take your iPad to an Apple Store or authorized service provider. They can diagnose the problem and repair your iPad if necessary.
