Do you have an iPad that won’t turn on You’re not alone. This is a common problem, and it can be incredibly frustrating. But don’t worry, there are a few things you can try to fix it. In this guide, I’ll walk you through the steps to troubleshoot and fix an iPad that won’t turn on. I’ll also provide tips on how to prevent this issue from happening in the future. So if your iPad is giving you trouble, read on for help!
How To Fix Ipad That Won’T Turn On
1. Force restart your iPad:
Press and hold the Power button and the Volume down button at the same time until you see the Apple logo.
2. Check if your iPad is charged:
Make sure that your iPad is plugged into a power source and that the battery is not completely drained.
3. Try a different cable and/or adapter:
If you are using a third-party cable or adapter, try using the original Apple cable and adapter.
4. Reset your iPad:
Go to Settings > General > Reset and tap Reset All Settings: This will not erase your data, but it will reset all of your settings to their defaults.
5. Restore your iPad:
If your iPad is still not turning on, you can restore it to factory settings. This will erase all of your data, so make sure to back up your iPad before you do this. To restore your iPad, connect it to your computer and open iTunes: Click on the iPhone icon and then click on the Restore button.
6. Take your iPad to an Apple Store or authorized service provider:
If you have tried all of the above steps and your iPad is still not turning on, you may need to take it to an Apple Store or authorized service provider for repair.
How to Troubleshoot: how to fix ipad that won’t turn on
What to do if your iPad won’t turn on
If your iPad won’t turn on, there are a few things you can try:
1. Check the power button:
Make sure that the power button is properly pressed and that the iPad is plugged into a power source. If the iPad is still not turning on, try a different power adapter or cable.
2. Force restart your iPad:
To force restart your iPad, press and hold the power button and the Home button at the same time for about 10 seconds. After the Apple logo appears, release both buttons.3. Restore your iPad:
If your iPad is still not turning on, you may need to restore it. To restore your iPad, connect it to your computer and open iTunes. Click on the iPad icon in the upper left corner of the iTunes window, then click on the Restore button.
4. Take your iPad to an Apple Store or authorized service provider:
If you have tried all of the above steps and your iPad still won’t turn on, you may need to take it to an Apple Store or authorized service provider for further assistance.
Troubleshooting tips
Here are some additional troubleshooting tips that you can try if your iPad won’t turn on:
Check the battery level:
If your iPad’s battery is low, it may not have enough power to turn on. Try connecting your iPad to a power source and letting it charge for a few minutes.
Check for software updates:
Make sure that your iPad is running the latest software update. To check for updates, go to Settings > General > Software Update.
Reset your iPad:
If your iPad is still not turning on, you can try resetting it. To reset your iPad, hold down the power button and the Home button at the same time for about 10 seconds. After the Apple logo appears, release both buttons.
Erase your iPad:
If your iPad is still not turning on, you may need to erase it. To erase your iPad, connect it to your computer and open iTunes. Click on the iPad icon in the upper left corner of the iTunes window, then click on the Erase button.
Preventing your iPad from not turning on
Here are a few things you can do to prevent your iPad from not turning on:
Keep your iPad charged:
Make sure that your iPad is always charged to at least 50%.
Update your iPad’s software regularly:
Keeping your iPad’s software up to date will help to protect it from bugs and other issues.
Avoid dropping your iPad:
Dropping your iPad can damage the internal components, which could prevent it from turning on.
Don’t expose your iPad to extreme temperatures:
Exposing your iPad to extreme temperatures can damage the battery, which could prevent it from turning on.
Conclusion
If your iPad won’t turn on, there are a few things you can try to troubleshoot the issue. If you have tried all of the above steps and your iPad still won’t turn on, you may need to take it to an Apple Store or authorized service provider for further assistance.
Must Read THIS: How To Fix Ipad When Screen Won’T Rotate
FAQs: How to Fix an iPad That Won’t Turn On
Why won’t my iPad turn on?
There are a few reasons why your iPad might not be turning on. Here are some of the most common causes:
The battery is dead: If your iPad’s battery is completely drained, it won’t be able to turn on. Try plugging your iPad into a power source and letting it charge for a few minutes.
The power button is stuck: If the power button is stuck in the on position, it can prevent your iPad from turning off. Try pressing and holding the power button for several seconds until you see the Apple logo.
The software is corrupted: If your iPad’s software is corrupted, it might not be able to start up properly. Try restarting your iPad by holding down the power button and the Home button at the same time until you see the Apple logo.
The hardware is damaged: If your iPad’s hardware is damaged, it might not be able to turn on. If you think your iPad’s hardware is damaged, you should take it to an Apple Store or authorized service provider for repairs.
How do I fix a dead iPad battery?
If your iPad’s battery is dead, you can try the following steps to fix it:
1. Plug your iPad into a power source: If your iPad is plugged into a power source, it will start charging and the battery will eventually turn on.
2. Force restart your iPad: If your iPad is not plugged into a power source, you can try force restarting it to see if that fixes the problem. To force restart your iPad, hold down the power button and the Home button at the same time until you see the Apple logo.
3. Take your iPad to an Apple Store or authorized service provider: If you’ve tried the above steps and your iPad’s battery is still not turning on, you should take it to an Apple Store or authorized service provider for repairs.
How do I fix a stuck power button?
If the power button on your iPad is stuck, you can try the following steps to fix it:
1. Use a toothpick or other thin object to gently pry the power button up: Be careful not to damage the power button.
2. Clean the power button with a dry cloth: This can help to remove any dirt or debris that might be preventing the power button from working properly.
3. Take your iPad to an Apple Store or authorized service provider: If you’ve tried the above steps and your iPad’s power button is still stuck, you should take it to an Apple Store or authorized service provider for repairs.
How do I fix a corrupted iPad software?
If your iPad’s software is corrupted, you can try the following steps to fix it:
1. Restart your iPad: Restarting your iPad can sometimes fix minor software problems. To restart your iPad, hold down the power button and the Home button at the same time until you see the Apple logo.
2. Update your iPad’s software: If your iPad is running an outdated software version, updating it can sometimes fix software problems. To update your iPad’s software, go to Settings > General > Software Update.
3. Restore your iPad to factory settings: If you’ve tried the above steps and your iPad’s software is still corrupted, you can try restoring it to factory settings. Restoring your iPad to factory settings will erase all of your data, so be sure to back up your iPad before you do this. To restore your iPad to factory settings, go to Settings > General > Reset > Erase All Content and Settings.
4. Take your iPad to an Apple Store or authorized service provider: If you’ve tried the above steps and your iPad’s software is still corrupted, you should take it to an Apple Store or authorized service provider for repairs.
How do I fix a damaged iPad hardware?
If your iPad’s hardware is damaged, you can try the following steps to fix it:
1. Take your iPad to an Apple Store or authorized service provider: An Apple Store or authorized service provider can diagnose the problem and repair your iPad’s hardware.
2. Replace your iPad’s battery: If your iPad’s battery is damaged, you can replace it with a new one. To replace your iPad’s battery, you can either take your iPad to an Apple Store or authorized service provider, or you can purchase a replacement battery and replace it
