Are you looking for an easy way to replace your iPad battery
You’ve come to the right place!
In this step-by-step guide, I’ll show you how to replace your iPad battery in just a few minutes.
So whether you’re a seasoned pro or a complete novice,
read on to learn how to replace your iPad battery like a pro!
We have provided Below Step By Step Guide On, How To Replace Ipad Battery?
How to Replace iPad Battery
Step 1: Gather your tools and materials:
You will need:
A Phillips head screwdriver
A Torx T5 screwdriver
A spudger
A lint-free cloth
A new iPad battery
Step 2: Power down your iPad:
To do this, hold down the Power button and the Home button at the same time until you see the Apple logo.
Step 3: Locate the battery compartment:
The battery compartment is located on the bottom of the iPad. It is covered by a small, round sticker.
Step 4: Peel off the sticker:
Be careful not to damage the battery.
Step 5:
Insert the Phillips head screwdriver into the hole in the center of the battery compartment:
Turn the screwdriver clockwise to loosen the screws.
Step 6:
Remove the two Torx T5 screws:
These screws are located on either side of the battery.
Step 7:
Use the spudger to pry open the battery compartment:
Be careful not to damage the battery.
Step 8:
Remove the battery:
Lift the battery up and out of the battery compartment.
Step 9:
Insert the new battery into the battery compartment. Make sure that the connector is properly aligned.
Step 10:
Replace the two Torx T5 screws.
Step 11:
Replace the Phillips head screw.
Step 12:
Reattach the sticker.
Step 13:
Power on your iPad.
How to Replace iPad Battery
What You Need
A Phillips head screwdriver
A replacement iPad battery
A soft cloth
A table or work surface
Steps
1. Turn off your iPad.
2. Remove the two pentalobe screws on the bottom of the iPad.
3. Use the soft cloth to pry open the back cover.
4. Remove the battery connector by gently pulling it up.
5. Remove the old battery by carefully lifting it up.
6. Align the new battery with the contacts on the iPad.
7. Press down on the new battery until it snaps into place.
8. Reattach the back cover and tighten the screws.
9. Turn on your iPad and verify that the battery is working properly.
Tips
Be careful not to damage the battery connector when removing the battery.
Make sure that the new battery is compatible with your iPad.
If you are having trouble replacing the battery, you can take your iPad to a Apple Authorized Service Provider.
Must Read THIS: How To Reset Frozen Ipad
